How to Create Your Personalised Premium Robin Decoration

  1. Type your name
    Enter the name you would like to add to your personalised robin decoration.
  2. Choose your font
    Select a font to give your robin decoration the look you want.
  3. Adjust the letter height and spacing
    Change the letter height and spacing to fit the name into your robin design.
  4. Fine-tune individual letters
    Enable the fine controls to adjust individual letters and improve their position and connections.
  5. Position your name
    Use the up/down and left/right controls to move the whole name into your preferred position.
  6. Adjust the engraving clearance gap
    Use the engraving clearance gap control to adjust the space between your lettering and the engraved areas of the robin. Increase or decrease the gap to create a clean separation between the name and the engraved details, helping your personalised design stand out clearly.
  7. Check and download your SVG
    Check the preview to make sure your happy with the design and adjust any  engraving areas that are too close to your lettering, then click Download SVG.
  8. Open the file in your laser software
    Import your downloaded SVG and check the overall size before preparing your laser settings.
  9. Set your cutting and engraving lines
    Your downloaded SVG uses two colours to identify the different laser operations:Black – Cut lines: These are the outlines that need to be cut completely through your material.Red – Fill Engrave: These areas need to be engraved to create the darker details on your robin decoration. Set your laser software to fill engrave these areas rather than cutting them.Set the correct speed and power for each colour to suit your laser machine and material. Make sure each colour is assigned to the correct operation before starting.
  10. Make your robin decoration
    Test your settings on a scrap of the same material. Run the red fill engraving first, followed by the black cutting lines to cut out your finished design.
  11. Add the finishing touch
    Remove your robin decoration from the laser, clean or finish it as required, and add ribbon or twine if you plan to hang it. Your personalised Premium Robin decoration is now ready to display, making it perfect for Christmas trees, festive decorations or personalised gifts!